Perancangan jaringan` akses fiber to the home dengan sistem ramah lingkungan pada wilayah sub urban (studi kasus: perumahan mansion sapphire karangrau)

FIKRI, MUBAROK (2019) Perancangan jaringan` akses fiber to the home dengan sistem ramah lingkungan pada wilayah sub urban (studi kasus: perumahan mansion sapphire karangrau). Other thesis, Institut Teknologi Telkom Purwokerto.

Preview	Text ABSTRACT.pdf - Accepted Version Download (41kB) | Preview
Preview	Text ABSTRAK.pdf - Accepted Version Download (42kB) | Preview
	Text COVER.pdf - Accepted Version Download (484kB)
Preview	Text BAB I.pdf - Accepted Version Download (55kB) | Preview
Preview	Text BAB II.pdf - Accepted Version Download (425kB) | Preview
Preview	Text BAB III.pdf - Accepted Version Download (3MB) | Preview
	Text BAB IV.pdf - Accepted Version Restricted to Registered users only Download (472kB)
Preview	Text BAB V.pdf - Accepted Version Download (45kB) | Preview
Preview	Text DAFTAR PUSTAKA.pdf - Accepted Version Download (107kB) | Preview
Preview	Text LAMPIRAN.pdf - Accepted Version Download (1MB) | Preview

Abstract

Increasing the need for high-speed internet access to the customer's side can be met by deploying optical networks to customer's homes or known as FTTH (Fiber To The Home) based on GPON technology (Gigabit Passive Optical Network). In this research, the Karang Karang Sapphire Housing Selection uses an environmentally friendly network system or uses a shared duct cable in a residential area, designed using Google Earth, Autocad, Optisytem simulation software. STO is located in Purwokerto Jalan Merdeka, a distance of 5,319 km from ODC (Splitter 1:4) located in Housing, the number of ODP Pedestal devices (Splitter 1: 8) will be used as many as 33 units with 3 distribution lines. Based on the power link budget all ONTs have met ITU-T G.984.2 standards both in calculation and simulation. Based on calculations, the values obtained in the third distribution path are -18,941, -18,599, -18,554 dBm and the simulation is -20,131 -19,972, 20,021 dBm. The results of design performance for BER and Q Factor in the simulation results obtained for the distribution of one 1.96258 × 10- 134 and 24.6469, two distributions 1.92654 × 10-136 and 24.8335, three distributions 5.85078 × 10-139 and 25,065, both of which have met the minimum BER and Q Factor standards at ITU-T, which are 10-9 for BER and> 6 (more than 6) for Q Factor. Keywords: FTTH, GPON, OLT, ODC, ODP, BER, Q-FACTOR.

Actions (login required)

View Item